About the Z-Vat.Consumable vats quickly become expensive, wasteful and problematic.
Why buy difficult to clean, fragile vats again and again? Don't throw your resin vats away! The Z-Vat is extremely durable plus much easier to clean than an acrylic resin tray. Users report the lowest distortion and highest definition of any parts they've produced using their 3D printer. |
Features
Treated with care, your Z-Vat should last a lifetime.
Borosilicate Glass BottomScratch and chemical resistant. Exceptional optics for outstanding print quality.
|
Polycarbonate FrameProvides extreme durability, plus resistance to alcohol for easy cleaning and swapping of resins. No weak corners prone to cracking.
|
Reversible LoadingEnjoy constant printing on the hinge side for better print success without uneven wear on the PDMS layer.
|
Tinted Sides (Optional)An amber filter prevents stored resin from curing while tank is outside the machine. Or order in all clear for a discount
|
As is normal with all PDMS-based trays the silicone layer will wear and need to be eventually replaced.
We offer a re-coat service, or advice on doing it yourself to make your vat good as new.
We offer a re-coat service, or advice on doing it yourself to make your vat good as new.
Remove the stress. Increase the quality.
That's what printing with the Z-Vat is all about.
What Our Customers Think.
|
"Finally got to test Zak's glass-bottom resin tank... WOW! Just printed up an Electric Ducted Fan and Rotor that I designed for small electric RC jet planes. My previous attempts with the stock resin tanks always had errors, distortion, and immediately clouded the bottom surface. Using the glass tank, the parts came out perfect! Superior print quality with zero noticeable distortion, no ghosting on the bottom, no partial-cure blobs, super sharp definition on all features! These are the results I hoped for with the stock setup, now realized with the purchase of the test tank from Z-Vat. This tank is the best thing to happen to my Form1+!"
-Rodrigo D., Pensacola, FL |
"The few resin tank prototypes I've used from Time_Man are still working well (no "cracking at the corner" issues), and the parts have printed cleanly... He has done a very good job. These Zvats are very solidly assembled and a lot of care has been taken to make them easily slip into the Form1 and 1+ part printing workflow."
-Tem K., Santa Cruz, CA |
"12 hour print a success.... Loving this Glass tank!!! Tank is kicking ass!!! I'm enjoying my form1+ again!!! I think the plastic tanks were causing my static build up. I'm having no dust issues like before. Will be keeping my form1+ when I receive my form2 as a backup for smaller prints."
-Jeremy N., Pueblo, CO |
"The quality, fit and performance all seem excellent...I can report some of the best parts that the machine has ever made. Absolutely superb surface finish and detail level.
Update after two months of regular use- "The tank is continuing to perform above and beyond what the plastic tanks can do. More repeatable, more detailed parts." -Andrew M., Wokingham, England |
*DISCLAIMER: The goods or services provided by Z-VAT INDUSTRIES are not endorsed, approved, sponsored, affiliated with or recommended by FORMLABS. The use of any goods or services provided by Z-VAT INDUSTRIES may cause the warranty of any third party product used in conjunction therewith to become void. Customer assumes the risk of any and all damage or loss from the use of goods or services provided by Z-VAT INDUSTRIES.